Abstract
•A novel energy-dissipating hold-down for CLT structures was proposed;•Failure mechanisms and mechanical properties were presented;•A simplified analytical model for estimating the basic mechanical properties was developed.
Connection is the most important part in cross-laminated timber (CLT) buildings as it guarantees necessary strength, stiffness, ductility, and integrality for the whole CLT structure. This paper proposes an innovative energy-dissipating hold-down connection for CLT structures, which combines the advantages of the soft-steel bracket and high-damping rubber for providing great energy-dissipating capacity and high ductility. A series of tests were performed under quasi-static monotonic and reversed cyclic loading to investigate the failure mechanisms and mechanical properties of the novel hold-down connection. Test results demonstrate that the connections can continue to work as a whole even after the occurrence of preliminary failures of steel ribs rupture and weld fracture. Final failure modes, including debonding between the rubber and steel plates, rupture of the front steel plate and breakage of screws, caused the invalidation of the connection. Meanwhile, load–displacement curves of the connections usually exhibit a bi-linear form, and the connection’s yielding is caused by the yielding of steel ribs. All the tested specimens exhibited stable energy-dissipating capacity in the working stage and were all classified as highly ductile. Furthermore, efforts were made to develop a simplified analytical model for estimating the basic mechanical properties of the novel hold-down connections. Comparison with test results shows that the analytical model can provide reasonable estimations of the initial stiffness, post-yield stiffness, yield force and failure force. The test results and analyses presented herein provide useful technical bases for supporting future studies and practical applications of the novel hold-down connection for CLT buildings.