Abstract
The present experimental study is undertaken to investigate the effect of target configuration on ballistic performance when struck by standard bullets of different velocities. At first, single mild steel plates, 1–8 mm thick, are tested, and the effect of thickness and mechanical properties of plate material are explored. Secondly, in-contact laminae comprising an 8 mm-thick target, and spaced laminae of the same total steel thickness, with spacing distances equal to or multiples of the bullet core diameter (6 mm) are tested and the effect of number, thickness, and arrangement of laminae sought.
In addition, fiberglass reinforced polyester (FRP) is used as a filler material for targets with spaced steel laminae. The influence of FRP's physical and mechanical properties on the ballistic performance of steel-FRP targets is investigated.
In order to perform the ballistic tests, a special setup is constructed, which consists of a launcher, a target clamp and a velocity-measuring device. In each experiment, the change in the projectile velocity (while penetrating the target) divided by the length of penetration is established as a measure of target performance.
Results show that single targets are more effective than laminated targets of the same total thickness, regardless of the configuration or striking velocity. It is noted, however, that the difference in performance diminishes as the striking velocity increases. Moreover, the effectiveness of laminated targets, in contact or spaced, increases as the number of laminae comprising each target decreases. Ballistic performance of laminated targets is further enhanced by using the thickest lamina as the back lamina. Results also emphasize the dependence of target performance on mechanical properties.
Steel-FRP targets show better performance than weight-equivalent steel targets. Performance of a steel-FRP target is further improved by increasing fiber weight fraction in the FRP.