Abstract
The main concern of this work is the mechanical characterization of adhesively bonded assemblies under dynamic shear loading ranging from quasi-static (10
−4
s
−1) up to high (10
4
s
−1) strain rates. The double-lap shear sample is proposed and a bonding procedure is established. The assemblies are made of steel substrates bonded with an epoxy adhesive. Two surface treatments of the substrates are considered: ethanol and sand shooting. The shear strength and the failure strain are measured by taking into account the testing setups accuracy and the non-uniform distribution of the stress and strain fields in the overlap region. The sensitivity of the strength and the failure strain to the strain rate is highlighted; it is found that the failure strain decreases and the shear strength increases with the strain rate until reaching a maximum value then it drops for very high strain rates.