Abstract
In the present study, the heat transfer, entropy, friction factor, exergy efficiency, pumping power, and performance index ratio of nickel/water nanofluids flow in a corrugated plate heat exchanger are investigated experimentally. The nickel nanoparticles were synthesized using the chemical precipitation method and characterized by various techniques. The stable water based nickel nanofluids were prepared with particle volume concentrations of 0.1%, 0.3%, and 0.6%. The experiments were conducted at nanofluids Reynolds numbers ranged from 300 to 1000. The properties of nickel nanofluid are evaluated experimentally as well. The thermal conductivity and viscosity enhancements are 33.92%, and 67.45% at a temperature of 60 °C compared to the base fluid data. The increase of nanoparticle loadings and Reynolds number leads to an augmentation of the overall heat transfer coefficient, heat transfer coefficient, and Nusselt number. The overall heat transfer coefficient, convective heat transfer, and Nusselt number enhanced by 38.60%, 57.35%, and 42.68% at 0.6 vol % of nanofluid and a Reynolds number of 707, respectively compared to water data. The thermal entropy generation is decreased by 15.70%, while frictional entropy generation and pumping power are increased by 68.29% and 61.77%, respectively at 0.6 vol % of nanofluid and a Reynolds number of 707 against water data. The exergy efficiency was enhanced by 42.27% at 0.6 vol % of nanofluid and a Reynolds number of 303 compared to water data. The performance index ratio is decreased with the use of nanofluids due to the increase of viscosity, friction factor, pressure drop, and pumping power.
•The performance of corrugated plate heat exchanger using Ni/water nanofluids are investigated experimentally.•The overall heat transfer coefficient is enhanced by 38.6% at φ = 0.6% and Re = 707.•The Nusselt number is enhanced by 42.68% at φ = 0.6% and Re = 707.•The exergy efficiency is enhanced by 42.27% at 0.6 vol % of nanofluid.