Abstract
A novel conductive nano material, nano spinel ferrites having the composition of calcium chromium magnesium nanoferrites (CaxCr0.5-xMg0.5Fe2O4), was fabricated via sol-gel auto combustion process. The main objective was to fabricate highly stable nanocomposite as conductive material. Reaction among highly pure grade magnesium nitrate Mg (NO3)(2)center dot 6H(2)O, calcium nitrate Ca (NO3)(2)center dot 4H(2)O, and chromium nitrate Cr (NO3)(3)center dot 9H(2)O, ferric nitrate Fe (NO3)(3)center dot 9H(2)O took place to fabricate the desired material and, later on, an inductance (L)-capacitance (C)-resistance (R) meter (LCR meter) was used to determine the conductive behavior of the material. During characterization, thermogravimetric study confirmed that the stable phase was obtained above 950 degrees C. Fabricated ferrite FTIR spectrum was observed between 400 cm(-1) and 4,500 cm(-1). The entire sample's structural investigation was carried out employing X-ray diffraction. Morphological analysis confirmed that particles possess angular structures having acute angles adjoining surfaces. During conductivity test, all fabricated nanoferrites presented that with the increase of frequency by LCR meter, AC conductivity had been increased. The outcome of doping of calcium on chromium magnesium nanoferrites on structural in addition to dielectric properties was synergistic.