Abstract
[Display omitted]
A porous surface of Ti–HA composite was successfully fabricated by pulsed current activated sintering (PCAS), followed by leaching using diluted H3PO4. The Ti and HA powders were mixed at different contents of the HA, Ti-5, 10, 30 and 40wt% HA powders. The mixed powders were pressed in a coated graphite die using pulsed current activated sintering (PCAS) under pressure of 60MPa at temperature of 1000°C for 5min. The sintered Ti–HA specimens were immersed in the eight kinds of leaching solutions at room temperature for 24h. The leached specimen’s surfaces were characterized using XRD, SEM, EDX and Rockwell hardness. The XRD patterns after sintering show that many phases were detected at the sintered specimen surfaces such as; Ti2O, CaO, CaTiO3, TixPy in addition to the remaining Ti and HA. Furthermore, the high concentration H3PO4 leaching solution is more efficient than the low concentration. Also the produced porous surfaces of Ti–HA materials containing more than 30% HA have a low relative density and hardness than the commercial Ti–6Al–4V ELI alloy. In a word, the presence of porous surface coated by HA will promote the nucleation of the biological apatite created with the human tissue and increase the bonding between them. So, the produced porous materials are considered so easy for the muscle cells to permeate after transplanted with high coherence.