Abstract
► We fabricated Al-composites with different amounts of exfoliated graphite nanoplatelets. ► The mechanical properties of the composites were evaluated by compression and hardness tests. ► The corrosion behavior of the composites in 3.5% NaCl solution was reported.
Aluminum composites with different amounts of exfoliated graphite nanoplatelets particles were fabricated by powder metallurgy method. The mixture powders were consolidated at 520
MPa for 5
min and followed by pressureless sintering at 600
°C for 6
h. The mechanical properties of composites were evaluated by compression and hardness tests. The corrosion behavior in 3.5% NaCl solution was investigated using potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) measurements. The mechanical testing results showed that the maximum strength and Vickers hardness increase as a function of exfoliated graphite nanoplatelets content. Corrosion data indicated that the presence of exfoliated graphite nanoplatelets and the increase of its concentration raise the corrosion rate and reduce the polarization resistance of Al. SEM/EDX investigations revealed that the presence of exfoliated graphite nanoplatelets activates the corrosion of Al due to the occurrence of galvanic corrosion. SEM/EDX investigations confirmed the electrochemical measurements showing that the increase of exfoliated graphite nanoplatelets content increases the corrosion of Al.