Abstract
A zeolitic imidazolate framework-8 (ZIF-8) electrode is a good candidate as an anode material. However, further developments of ZIF-8 electrodes present a major challenge owing to their excessively time-consuming preparation processes. To overcome this issue, here, we prepared a ZIF-8 material within 15 min by the microwave-assisted solvothermal technique. The structural properties of the samples before and after annealing were examined by XRD, whereas the local atomic and electronic structures were studied by X-ray absorption spectroscopy (XAS). XRD data exhibited the formation of the ZIF-8 material. XRD data also affirmed the formation of an amorphous phase ZnNC after annealing under N-2. XAS results revealed that the ZIF-8 material converted to ZnNC after annealing under N-2. Moreover, the morphology was investigated by HRTEM with elemental analysis. The surface areas of ZIF-8 and ZnNC samples were studied and found to be 1610 cm(2) g(-1) and 276 cm(2) g(-1), respectively. The ZnNC material revealed higher discharge and charge capacities of similar to 826 and 447 mA h g(-1), respectively. The coulombic efficiency of the ZnNC electrode considerably improved from 52% in the 1(st) cycle to 95% in the 4(th) cycle, signifying a good stability over the subsequent cycles. The satisfactory structural and electrochemical characteristics of the ZnNC electrode make this electrode a promising anode material for lithium-ion batteries.