Abstract
This study deals with the analysis of an ink-producing machine rotor part composed of WC-2Ni-1Co which failed in brittle manner during service. The part was made by powder metallurgy techniques and is being used in ink-grinding machines due to its high hardness and wear resistance. Similar parts had worked satisfactorily for many ink compositions, but the part under investigation failed prematurely. Investigation was considered important because the part is expensive, and other identical components frequently failed after a short service life. Moreover, replacement of the part requires complete dismantling of the machine which reduces the production rate. Spectroscopic analysis, density, optical and scanning electron microscopy, SEM-EDS analysis, fractography, X-ray diffraction, and microhardness measurements were carried out on failed parts to find out the root causes of the failure. Results revealed that the part cracked due to combined effects of selective dissolution of metal binder-caused corrosive action of ink solution and hydrogen-induced deterioration of WC and Ni-Co phases. Localized removal of binder phase left the hard WC phase unsupported. Cracks were found initiating from the root of the machined slot which acted as a stress concentration point and resulted in brittle fracture.