Abstract
Experiments are conducted for investigating the effect of normal pressure, sliding amplitude and oscillating sliding frequency on friction, wear coefficient and threshold energy for wear activation of 52100 high carbon bearing quality steel (ASTM A295) during a false brinelling test. The cylinder-on-cylinder set-up is used. The investigation showed that the friction coefficient decreases with increasing normal pressure and increases with increasing sliding amplitude; however, there is no influence of an increase in oscillating sliding frequency. Similarly, the wear coefficient decreases with increasing normal pressure and increases with increasing sliding amplitude; however, unlike the friction coefficient, it increases with an increase in oscillating sliding frequency. Different conditions do not have a significant influence on the threshold energy for wear activation. By incorporating a varying friction and wear coefficient with changing sliding parameters, the analytical prediction for false brinelling are improved by 10–50% over the constant parameter model.
•The effect of varying conditions on friction, wear coefficient was investigated.•The effect of different parameters on threshold energy for wear activation was investigated.•The results were then used to improve and validate the false brinelling models developed previously.