Abstract
Recent studies have proposed different approaches to mitigate the risk of overload and failure in Software-Defined Networks (SDNs). Some of these approaches have proven effective but only in specific use cases, making it potentially difficult to generalize their application. Furthermore, network failure detection and recovery by the SDN control plane requires sophisticated software logic running on multiple controllers that are non-intrusive to the network environment. While this allows more flexibility to respond to failure events, it also implies that each controller application must include its recovery logic, which increases code complexity. In this paper, we propose a fast fail-over technique for solving the problem of a controller failure or target availability in the network. We argue that inter-domain controller synchronization can result in high network overhead and should be minimized to per-need base only. To this end, upon detecting a failure in the control plane, the proposed fast failure recovery technique leverages a load-shifting scheme to initialize alternate paths and proactively instantiate flow rules to reduce flow setup latency. To prevent packet loss during failure recovery, we utilize a forwarding information table that quickly replays inputs to the controller after failure recovery. Our extensive experiments show that the average latency incurred by the controller to controller communication is approximately twice that of per-need based synchronization. The experimental results also show that our proposed technique achieved a 50% reduction in service interruption period and 75% flow_mod reduction during a single link failure over the traditional SDN baseline approach.