Abstract
In this work, a simple and adequate method for fast-neutron spectroscopy is proposed. This method was performed by free-in-air fast-neutron irradiation of CR-39 Nuclear Track Detectors (NTD) using an Am-Be source. Detectors were then chemically etched to remove few layers up to a thickness of 6.25 mu m. By using an automatic image analyzer system for studying the registration of the induced-proton tracks in the NTD, the obtained data were analyzed via two tracks shapes. In the first one, the elliptical tracks were eliminated from the calculation and only the circular ones were considered in developing the response function. In the second method all registered tracks were considered and the corresponding response function was obtained. The rate of energy loss of the protons as a function of V[(dE/dX) - V] was calculated using the Monte Carlo simulation. The induced-proton energy was extracted from the corresponding dE/dX in NTD using a computer program based on the Bethe-Bloch function. The energy of the incident particles was up to few hundred MeV/nucleon. The energy of the interacting neutrons was then estimated by means of the extracted induced-proton energies and the scattering angle. It was found that the present resulting energy distribution of the fast-neutron spectrum from the Am-Be source was similar to that given in the literature where an average neutron energy of 4.6MeV was obtained.