Abstract
This paper proposes a shunt active filter (SAF) for harmonic mitigation and reactive power compensation in an induction heating (IH) system. The high-frequency switching in the resonant inverter of the IH system generates a considerable number of high-frequency harmonics. The latter flow back to the supply side and causes a wide variety of problems. The predominant ones are the deterioration of the power quality, distortion in the grid voltage, and malfunctioning of the protective equipment. These harmonics need to be attenuated as per the IEEE 519-1992 and IEEE 519-2014 standards. To overcome these problems, an SAF based on the modified version of instantaneous power theory was placed between the power supply and the IH equipment. Moreover, the proposed model could work in unbalanced and non-sinusoidal input voltage conditions, as well as dynamic conditions with changing reference currents. The feasibility of the proposed SAF-based IH system was verified by a series of simulation results and a comparative analysis of the THD of the input currents. The power quality issues were successfully addressed, which signifies the ability and effectiveness of the proposed model to mitigate the problems caused by harmonics and enhance the power factors.