Abstract
Fracture behaviours of nanosilica filled bisphenol-F epoxy resin were systematically investigated at ambient and higher temperatures (23 degrees C and 80 degrees C). Formed by a special sol-gel technique, the silica nanoparticles dispersed almost homogenously in the epoxy resin up to 15 vol.%. Stiffness, strength and toughness of epoxy are improved simultaneously. Moreover, enhancement on fracture toughness was much remarkable than that of stiffness. The fracture surfaces taken from different test conditions were observed for exploring the fracture mechanisms. A strong particle-matrix adhesion was found by fractography analysis. The radius of the local plastic deformation zone calculated by Irwin model was relative to the increment in fracture energy at both test temperatures. This result suggested that the local plastic deformation likely played a key role in toughening of epoxy. (C) 2008 Elsevier Ltd. All rights reserved.