Abstract
This study aimed to simulate the X-ray Irradiator narrow-spectrum series and compare the results with experimental and recommended values in ISO standards. X-Ray beam qualities of N-40 to N-300 were established experimentally at the national Secondary Standard Dosimetry Laboratory (SSDL) of Morocco in purpose of calibrating radiation protection- level. The variations between the first half-value layer (1st HVL) and the second (2nd HVL) for experimental were within 5%. Also, homogeneity coefficients h were mostly between 0.75 and 1 according to ISO. GAMOS Monte Carlo code was used to simulate the radiation quality of narrow-spectrum series between N-40 to N-150. All 1st HVL, 2nd HVL, and h simulation values were compare with experimental and ISO values. In MC codes and GAMOS, there is no direct way to generate the X-ray spectrum if we do not have details of the X-ray tube geometry, dimensions and materials. Therefore, Institute of Physics and Engineering in Medicine report number 78 was used to generate the X-ray spectrums in purpose to test this method accuracy. The simulation results for the 1st HVL and 2nd HVL showed a good agreement with experimental data and with ISO 4037–1:1996 given values. Also, the comparison results showed that most of the homogeneity coefficients are within the ISO standard range.
•Narrow series beam quality was established at National SSDL of Morocco.•Beam quality of NS were simulate using GAMOS/GEANT4.•IPEM 78 spectrum data were used to generate x-ray spectrums.