Abstract
► Various heating load distributions with same average heat flux value are modelled in channel flows. ► Exact solutions for the conduction–convection energy balance equations are obtained using complex analysis methods. ► The lowest maximum excess temperature is obtained with the exponential distribution of the heat flux. ► It is at most 22.4% lower than that with uniform heat flux distribution. ► This management is capable of increasing heat flux by 21.35% to have same maximum temperature with uniform heat flux.
This work seeks for the maximum possible heat transfer enhancement in laminar channel flow due to properly distributing the heat flux over the boundaries. The considered heat flux distributions are (A) Periodic step, (B) Periodic sinusoidal (C) Linear, and the (D) Exponential distribution. All of these distributions have the same average heat flux value. Appropriate dimensionless governing energy equations are solved using various complex analysis methods. Different energy performance factors computed to completely characterize the problem. Comparisons with numerical solutions are performed and excellent agreement is obtained. Various correlations are identified. A parametric study of all involved parameters is presented graphically. It is found that the maximum heating source excess temperature for case (D) is at most 22.4% lower than that with uniform heat flux distribution. The previous percentage changes to 18% and 10.7% for the cases (C) and (B), respectively. These results are capable of increasing heat flux by 21.35%, 15.98% and 10.22%, respectively, to attain the same maximum temperature of the uniform heat flux distribution. Finally, this work proves that properly managing the heat flux distribution can transfer additional noticeable heat under same maximum temperatures.