Abstract
Purpose - The purpose of this paper is to report the use of zinc phosphate pigment as a chromate substitute for coatings on non-ferrous metals (galvanized steel, pure aluminum, a-brass and pure copper).
Design/methodology/approach - Paint systems based on zinc chromate and zinc phosphate pigments were prepared. The paints were tested for their physico-mechanical properties. Testing of the anticorrosive properties of the zinc phosphate pigment in comparison with zinc chromate pigment was carried out by accelerated corrosion exposure, i.e. immersion in 3.5 percent salt solution and exposure for one year at five outdoor stations.
Findings - The possibility of replacing chromate pigment was assessed and the "gap" observable between the performance of zinc chromate and zinc phosphate pigments was noted.
Originality/value - The non-toxic inhibitive pigment, zinc phosphate, incorporated into a plasticized-chlorinated rubber binder, could be applied successfully for the protection of non-ferrous substrates.