Abstract
•Ag NWs-SWCNTs (AS) composites with high and sparse density networks were fabricated by ultrasonic.•The AS/AZO (ASA) bilayer showed superior transmittance (92%@550 nm), mechanicity, stability, and adhesion.•The film demonstrates high stability with a ΔR/R0 = 10% after 10,000 bending times, boiling, taping, and CO2 plasma.•The power conversion efficiency of photovoltaic devices with flexible ASA TCFs was increased by 26%.•No significant reduction in power conversion efficiency was observed even after bending for 3000 times.
[Display omitted]
Indium tin oxide (ITO) is widely used in transparent conductive films (TCFs); however, several disadvantages, such as high cost and toxicity of indium, limit its applications. Therefore, it is necessary to develop other materials that can replace ITO. Silver nanowires or single walled carbon nanotubes (SWCNTs) have attracted considerable interest owing to their unique electrical, optical, and thermal stabilities, and thus, they are ideal for transparent electrodes for flexible or stretchable devices. In this study, we develop a novel architecture of composite TCFs on a polyethylene naphthalate (PEN) flexible substrate. Herein, the silver nanowires-SWCNTs films with nested density structure were fabricated through ultrasonic spraying technology by varying the spraying width. For achieving enhanced transmittance, we combined the larger irregular grids and holes with fewer nanowires stacked in the longitudinal direction, more optical channels, and good carrier transport. Thereafter, aluminum-doped zinc oxide (AZO) was used as capping to the structure for enhancing the optical properties of the TCFs. The silver nanowires-SWCNTs/AZO (ASA) bilayer was obtained in the optimized architecture, which showed superior optoelectronic performance to that shown by commercial ITO with a high optical transmittance of 92% at the wavelength of 550 nm and low sheet resistance of 17 Ω/sq. In the specially structured conductive film, the significant improvement in the transmittance and uniformity of the sheet resistance was attributed to the effective nanowire junction contact compared to that in ordinary structure of silver nanowires, which reduced the mean density of small clusters of nanowires. Compared with the silver nanowires-SWCNTs films, the ASA bilayer film exhibited excellent resistance to boiling, mechanical bending (10,000 cycles), and CO2 plasma. Moreover, the sheet resistance of ASA changed slightly after the tape tests, thereby illustrating a strong adhesion to the PEN substrate after the enclosure of AZO. Meanwhile, the AZO capping layer can enhance the optical transmittance between 600 and 1500 nm. In addition, the amorphous silicon photovoltaic devices with flexible ASA TCFs exhibited a power conversion efficiency (PCE) of 8.67%. After bending for 3000 times, the PCE was decreased to 8.20%, thereby demonstrating the potential of developed films to replace traditional ITO.