Abstract
For an efficient energy harvesting by the PV/thermoelectric system, the maximum power point tracking (MPPT) principle is targeted, aiming to operate the system close to peak power point. Under a uniform distribution of the solar irradiance, there is only one maximum power point (MPP), which easily can be efficiently determined by any traditional MPPT method, such as the incremental conductance (INC). A different situation will occur for the non-uniform distribution of solar irradiance, where more than one MPP will exist on the power versus voltage plot of the PV/thermoelectric system. The determination of the global MPP cannot be achieved by conventional methods. To deal with this issue the application of soft computing techniques based on optimization algorithms is used. However, MPPT based on optimization algorithms is very tedious and time consuming, especially under normal conditions. To solve this dilemma, this research examines a hybrid MPPT method, consisting of an incremental conductance (INC) approach and a moth-flame optimizer (MFO), referred to as (INC-MFO) procedure, to reach high adaptability at different environmental conditions. In this way, the combination of the two different algorithms facilitates the utilization of the advantages of the two methods, thereby resulting in a faster speed tracking with uniform radiation distribution and a high accuracy in the case of a non-uniform distribution. It is very important to mention that the INC method is used to track the maximum power point under normal conditions, whereas the MFO optimizer is most relevant for the global search under partial shading. The obtained results revealed that the proposed strategy performed best in both of the dynamic and the steady-state conditions at uniform and non-uniform radiation.