Abstract
This study presents types 1 and 2 hybrid converters with reduced power circuit complexity compared with the mixed cell modular multilevel converter (MC-MMC). The type 1 converter is formed by replacing the director switches of the alternate arm converter by high-voltage (HV) half-bridge (HB) cells rated for half of the dc-link voltage. Also, it resembles special case of MC-MMC, where the entire HB cells of each arm are lumped into a single HV HB cell, with both capacitors of the half- and full-bridge cells are exposed to fundamental current as in the conventional MMC. The upper and lower arms of the type 2 converter resemble a front-to-front connection of two three-phase hybrid cascaded two-level converters, where the cell capacitors of the three-phase two-level converters that act as director switches do not experience fundamental currents. Therefore, the type 2 converter offers compact design compared with type 1 converter and the MC-MMC. The technical viabilities of the proposed hybrid converters are assessed using simulations, with both converters modelled in MATLAB-Simulink using electromagnetic transient simulation approach, considering normal and transient conditions. Experimental results obtained from single-phase type 1 converter confirm the practical viability of the proposed converters.