Abstract
The stretched surface's convective heat transfer capability can be improved by using nano -particles. There is a significant role of the Prandtl number in determining the thermal and mo-mentum stretching layer surfaces. It is proposed in this study that an effective Prandtl number model be used to explore the two-dimensional oblique stagnation point flow of gamma Al2O3 -H2O and gamma Al2O3 -C2H6O2 nanofluids moving over a convective stretching surface. The fluid in question is subjected to a thorough investigation. It is necessary to apply non-linear ordinary differential equations in order to connect the controlling partial differential equations with the boundary conditions. To solve these equations, an efficient and reliable numerical technique is used. Shooting Method with Runge Kutta-IV in Mathematica software. Visual representations of normal and tangential velocity and temperature as well as streamlines as a function of many physical parameters are shown. The results show that as the volume fraction of nanoparticles increases, the fluid flow f(y), h(y) and velocityf ' (y), h ' (y) all increase, whereas the flow f(y) and velocity f ' (y) both increase against the stretching ratio parameter, while the flow h(y) and velocity h ' (y) both decrease. When the volume percentage of nanoparticles and the Biot number are both increased, the temperature rises. However, when the stretching ratio parameter is increased, the temperature falls. Physical attributes like the local skin friction coefficient and the heat flow may be characterized in many ways. A nanofluid comprised of gamma Al2O3-C2H6O2 outperformed a gamma Al2O3 -H2O nanofluid in terms of heat transfer rate. The source of zero skin friction may be observed to move to the left or right depending on the balance of obliqueness and straining motion at point xs. The computed numerical results of the current research correspond well with those accessible in the literature for the limiting scenario.