Abstract
[Display omitted]
•The Late Cretaceous clastics in the Shoushan Basin are divided into five microfacies.•The microfacies heterogeneity is due to the differential implication of the diagenetic factors.•These rocks are divided into some reservoir rock types to get a more accurate reservoir modelling.•The very fine massive sandstone microfacies has the best reservoir quality due to its dissolution.•The laminated siltstone and the bioturbated limestone are highly cemented by silica cement.
The Late Cretaceous Upper Bahariya Member is one of the most prolific reservoir sequences in the North Western Desert of Egypt. In this paper, we describe core samples of the Upper Bahariya Member, including core photos, conventional core analysis, petrographical description, scanning electron microscope images, and XRD analysis.
Samples for this study are from the reservoir sequence in four wells selected from the Shurouk Field in the Shoushan Basin to delineate the impact of the constraint mineral composition on the reservoir quality. The objective of this study is to get an accurate reservoir characterization of this reservoir by applying the rock typing technique to the studied sequence where four Lithofacies Associations (LFA1, LFA2, LFA3, and LFA4) and four corresponding Reservoir Rock Types (RRT1, RRT2, RRT3, and RRT4) were assigned. These are defined as 1) very fine massive sandstone (LFA1, RRT1), 2) laminated, cross-bedded and bioturbated sandstone (LFA2, RRT2), 3) laminated, highly argillaceous and ferruginated sandstone and siltstone (LFA3, RRT3), and 4) laminated and ferruginated siltstone and well cemented bioturbated limestone (LFA4, RRT4). Petrographically, these lithofacies were categorized into five microfacies; 1) glauconitic quartz arenite, 2) subfeldspathic arenite, 3) glauconitic sublithic arenite, 4) ferruginated subfeldspathic wackes, and 5) sandy fossiliferous packstone microfacies. Conventional core samples include bulk and grain densities (ρb and ρg, respectively), helium porosity (∅He), and horizontal and vertical permeabilities (kH and kV, respectively). The application of the Dykstra-Parsons technique to the available permeability data indicates that the studied sequence is extremely heterogeneous (heterogeneity factor (V) = 0.90). Based on the available samples, the normalized porosity index (∅z), reservoir quality index (RQI), flow zone indicator (FZI), and the discrete rock type values (DRT) were estimated to determine the reservoir quality. The RRT1 samples are characterized by the best reservoir properties (av. ∅He = 14.7%, av. kH 42.0 = md, av. RQI = 0.47 µm, av. FZI = 2.87 µm, and av. DRT = 13), whereas the lowest reservoir quality is assigned to the RRT4 samples (av. ∅He = 18.8%, av. kH 0.30 = md, av. FZI = 0.15 µm, av. RQI = 0.04 µm, and av. DRT = 7). The low reservoir quality of the RRT4 is primarily attributed to the predominance of lower quality features (compaction effect, cementation, and presence of glauconite and authigenic minerals). Following the Improved Stratigraphic Modified Lorenz (ISML plot), the Upper Bahariya reservoir is subdivided into five Hydraulic Flow Units (HFUs) such as the HFU-2, and the HFU-4 that are considered superconductive flow units that alternate with three poorly hydraulic conductive HFUs (HFU-1, HFU-3, and HFU-5). The present integrated sedimentological and petrophysical workflow is considered a significant study of the Shoushan basin which can improve exploration activities as well as production optimization. In addition, dividing the studied clastic sequence into five microfacies association and four reservoir rock types can be extended to other equivalent subsurface Late Cretaceous clastic sedimentary rocks in the vicinity and other basins.