Abstract
Recently, it was found that excess phosphorus (Pi) removal could be achieved in activated sludge with an aerobic/extended-idle (AEI) process. In this study, batch tests were performed to further reveal the inducing mechanism of Pi removal involved in the AEI process. Unlike the classical anaerobic/aerobic process where an anaerobic Pi release along with a significant polyhydroxyalkanoate (PHA) accumulation drives polyphosphate (poly-P) accumulating organisms (PAOs) to over-store Pi as poly-P, an idle Pi release accompanied by a low-idle PHA production, which is usually considered to be detrimental for biological Pi removal, was observed to induce some cells to effectively uptake Pi in excess of metabolic requirement in the AEI process. With the increase of idle Pi release, Pi removal efficiency linearly increased. The results also showed that a long idle period with a low level of intracellular glycogen could significantly increase Pi release contents, thus remarkably enhancing Pi removal performances. Fluorescence in situ hybridization analysis further revealed that activated sludge in the AEI process contained 37.6% of Accumulibacter (PAOs) and 28.2% of Competibacter and Defluviicoccus-related organisms (glycogen accumulating organisms). This study revealed an actually existent, yet previously unrecognized, inducing mechanism of poly-P accumulation, and this mechanism behind the AEI regime may provide a scientific basis for the development of an alternative strategy for Pi removal from wastewaters. Biotechnol. Bioeng. 2012; 109: 27982807. (c) 2012 Wiley Periodicals, Inc.