Abstract
Silicon industry has a mature learning curve which is the driver for 90% share of the PV market. Yet, the cost/m2 of the planar crystalline silicon solar cell is still high. To reduce the cost of silicon-based solar cells, heavily doped wafers can be used in a proposed npn microstructure in which photoexcited carries are vertically generated while the collection of carriers is accomplished in the lateral direction. In this work, we report on the influence of the heavily p + base doping concentration, Na, on the performance of the cell for different base widths. All simulations are performed by using SILVACO TCAD under AM1.5 illumination. The results show that for Na extending from 5 × 1017 cm−3 to 2 × 1019 cm−3, the cell could achieve a competitive efficiency, from 15.4% to 9%, respectively.
•Device simulation of proposed npn microstructure solar cell was comprehensively performed.•The impact of base high doping on the device performance was fully discussed.•The results show that for NB ranging from 5 × 1017 cm−3 to 2 × 1019 cm−3, the cell could achieve a competitive efficiency, from 15.4% to 9%, respectively.•For base doping ranging from 5×1017 cm-3 to 2×1019 cm-3, a competitive efficiency is 15.4% to 9%, respectively.