Abstract
Coupling surface and groundwater for a better understanding of the hydrologic response in arid basins is essential for managing water resources. The study aims to integrate surface water (SW) and groundwater (GW) modeling in an arid environment and to identify groundwater sources at Hadat Ash-Sham farm station in the Al-Lusub watershed, located in the western part of Saudi Arabia. The curve number (CN) method for SW modeling is primarily used to estimate GW potential recharge based on a developed correlation equation between event-based rainfall and potential recharge, which is processed in the Hydrologic Engineering Center-Hydrologic Modeling System (HEC-HMS) software. Monthly potential recharge is utilized to compute GW modeling in MODFLOW. Van Mullem's equation is used to calculate hydraulic conductivity (K) from CN. The calibration of steady-state GW modeling reveals that the K (from Van Mullem's equation) is within the range of measured K in the field. The transient groundwater modeling phase concludes that the groundwater system in the Al-Lusub watershed can be interpreted based on two different scenarios. The first is that an extra recharge from a nearby watershed flows through the geological structure into a downstream area. The second scenario involves potential recharge from surface water flowing on the Al-Lusub watershed's mainstream bed. Validation reveals a strong relationship between predicted and observed water tables. The root mean square error (RMSE) for Scenarios 1 and 2 are 0.6 m and 0.7 m, respectively. Further investigation is needed to determine the region's most common scenario.