Abstract
Perovskite solar cells (PSCs) have shown unprecedented efficiency progress from 3.8% in 2009 to 24.2% in 2019. Up to now, the highest device efficiencies were recently achieved by employing n-type SnO2 on the transparent front electrode with conventional structure (n-i-p structure), while TiO2 remains the most used electron transport layer in PSCs. However, the comparably large J-V hysteresis in planar PSCs and the high temperature process required in mesoporous TiO2 structures severely limit the further commercial application. Therefore, inverted PSCs (p-i-n structure) employing p-type NiOx as the hole transport layer (HTL) on the front electrode have attracted massive attention in recent years. This is mainly due to their lower processing temperature for large scale and flexible devices, negligible J−V hysteresis effects, and furthermore, better stability as compared to organic HTLs. In spite of all these merits of NiOx based HTLs, the reported efficiencies of inverted PSCs are still lower than that of conventional PSCs. The main reasons can be assigned to limitations arising from the low conductivity and a mismatched band position of NiOx. Doping has been considered to be an effective way to adjust the electrical and optical properties of semiconductor oxides in a large extent and has already shown promising results in improving the photovoltaic performance of NiOx based inverted PSCs. In this review, recent investigations about the influence of doping on the structural, electrical, and optical properties of NiOx HTLs are summarized. We also discuss the advantages and current challenges of utilizing NiOx HTLs in PSCs and attempt to give prognoses on future progress exploiting them in high-efficiency inverted PSCs.
Research on planar perovskite solar cells (PSCs) in (inverted) p–i–n configuration, using transparent p-type front-electrodes, is strongly emerging. NiOx has been demonstrated to be one of the most promising candidates to be employed as a hole transport layer (HTL) in these devices, however, its low intrinsic conductivity and unmatched Fermi level with respect to the perovskite layer limit the performance of the PSCs. Extrinsic doping of NiOx HTLs is a versatile and powerful strategy to mitigate these shortcomings, which, within the past three years, led to significantly enhanced power conversion efficiencies (exceeding 20%). In this review, we present a comprehensive overview of the strategies applied to improve the performance of NiOx HTLs used in inverted PSCs with special emphasis on the properties modulation induced by extrinsic doping. Current challenges and perspectives for exploiting these HTLs in high-efficiency inverted PSCs are also given. [Display omitted]
•Doping strategies of NiOx hole transport layers in perovskite solar cells are reviewed.•Modulation of the properties of NiOx induced by extrinsic doping is highlighted.•Current challenges and perspectives for future progress are given.