Abstract
In this article, a new method is developed to design a three-band miniaturized bandpass filter (BPF) that uses two asymmetrically coupled resonators with one step discontinuity and open-circuited uniform impedance resonator (UIR) to achieve Global Interoperability with Microwave Access (WiMAX) and Radio Frequency Identification (RFID) applications. First, a pair of asymmetrical step impedance resonators (ASIR) is used to implement a dual band filter, then a half wavelength uniform impedance resonator is added below to the transmission line to achieve a triple band response. The proposed filter resonates at frequencies of 3.7 GHz, 6.6 GHz, and 9 GHz with the fractional bandwidth of 7.52%, 5.1%, and 4.44%, respectively. By adjusting the physical length ratio (a) and the impedance ratio (R) of the asymmetric SIR, the proposed fundamental frequencies of the triple BPF are obtained. Moreover, the coupling coefficient (K-e) and external quality factor (Q(e)) are investigated between the resonators and the input/output ports of the transmission line and are calculated using full-wave EM simulator HFSS. In addition, five transmission zeros are introduced near the passbands to increase the filter selectivity. Finally, the proposed filter is designed and fabricated with a size of 13.69 x 25 mm (0.02 lambda(g) x 0.03 lambda(g)), where lambda(g) represents the guiding wavelength in the first passband. The simulated and measured results have a good correspondence, thus confirming the design concept.