Abstract
Eriochrome Black T (EBT) is mutagenic and carcinogenic, and thus its presence in water may result in severe illnesses. This study was aimed at adsorbing EBT from simulated water samples by using a batch adsorption process, onto native (GP) and washed garlic peel (WGP). Surface and structural characterization of native and washed GP was performed using FTIR, SEM, BET, and BJH analysis. The effects of several parameters, affecting the process of adsorption, like pH, temperature, contact time, adsorbent dose, and initial dye concentration, were also examined. Freundlich and Langmuir isotherms were applied to the equilibrium data. Pseudo-first and pseudo-second order models were used to study the adsorption kinetics. The Langmuir isotherm and pseudo-second order model perfectly explained the equilibrium data. Delta G degrees, Delta H degrees, Delta S degrees studies indicated that adsorption of EBT onto GP and WGP was a favorable, spontaneous, and physical process. Maximum dye removal by GP (96%) and WGP (82%) was observed at pH 2. Similarly Maximum adsorption capacities were found to be 99.5 mg/g and 89.4 mg/g for GP and WGP, respectively. It is concluded from these results that garlic peel can be used as a cheaper and more efficient material for the adsorptive removal of EBT from contaminated water samples.