Abstract
Titanium alloy (Ti-6Al-4V), being considered as hard-to-machine material, offers many challenges especially during conventional machining. Electric discharge machining could be a good option if it offers a good match between material removal rate and surface finish of the machined feature. The issue of appropriate selection of electrode material for good machining of Ti-6Al-4V is not yet comprehensively explored which is the core focus of this study. Moreover, the effect of pulse time ratio is thoroughly examined which is not specifically studied before. Discharge current and pulse time ratio are considered as the input variables, whereas the material removal rate and surface roughness are selected as performance measures of machinability. Copper, aluminum, brass and graphite are employed to evaluate the machining behavior. Experimental results revealed that aluminum electrode provides the lowest surface roughness, whereas the maximum material removal rate is achieved using graphite electrode. However, graphite electrode can offer high material removal rate with low surface roughness by initially employing negative tool polarity for rough machining and then positive tool polarity for fine machining.