Abstract
This work systematically deals with the development of an (Al–10Zn) die-casting alloy reinforced with in-situ synthesized hexagonal-shaped TiB2 nano-rods through casting and hot-extrusion processes. The cast specimens were extruded at 673 K with an extrusion ratio of 2:1 to orient the micro-texture, generate sub-grains within grains, reorder the reinforced in-situ TiB2 nanoparticles in the matrix, and engender strain fields to improve the mechanical properties. The nanoscale hexagonal TiB2 nano-rods (∼89 nm length and 14 nm edge) were synthesized by the chemical reaction of two halide salts (K2TiF6 and KBF4) with (Al–10Zn). The fabricated AMNCs were characterized using diffracted beams (XRD), scattered beams (FESEM and EBSD) and transmitted beams (TEM) received from the specimen. The diffracted beams from the X-rays reveal the formation of a TiB2 phase with a major α-Al phase and an individual Zn phase. The scattered beams from FESEM and EBSD revealed the homogenous distribution of TiB2 with less particle-free spacing, refinement of grains to an ultrafine level, and the absence of imperfections such as voids and interfacial de-bonding. The strain fields were observed through transmitted beams in the TEM analysis which were engendered by the thermal misfit between the matrix and TiB2 reinforcement. Among the fabricated AMNCs, (Al–10Zn) + 6 wt% TiB2 nanocomposite exhibited higher mechanical strength (160 MPa UTS) whereas (Al–10Zn) + 4.5 wt% TiB2 nanocomposite retained the ductility with improved strength (151.7 MPa UTS and 40% elongation). The strengthening mechanisms were computed using the (a) Zheng and Chen model and (b) Modified Cylne model to estimate the contribution of individual strengthening, and compared with the experimental results. The grain size strengthening contributed more to the total strength owing to the Zener pinning effect by in-situ TiB2 nano-rods.
•Designed and manufactured (Al–10Zn) reinforced with TiB2 nanocomposites.•Investigated detailed microstructural and phase formations.•Examined the mechanical behaviour and relative slip-distance.•Investigated various fracture behaviour.•Computed and correlated the obtained mechanical properties with strengthening mechanisms.