Abstract
The mass attenuation coefficients of Rhizophora spp. binderless particleboard with four different particle sizes (samples A, B, C and D) and natural raw Rhizophora spp. wood (sample E) were determined using single-beam photon transmission in the energy range between 16.59 and 25.26keV. This was done by determining the attenuation of Kα1 X-ray fluorescent (XRF) photons from niobium, molybdenum, palladium, silver and tin targets. The results were compared with theoretical values of young-age breast (Breast 1) and water calculated using a XCOM computer program. It was found that the mass attenuation coefficient of Rhizophora spp. binderless particleboards to be close to the calculated XCOM values in water than natural Rhizophora spp. wood. Computed tomography (CT) scans were then used to determine the density profile of the samples. The CT scan results showed that the Rhizophora spp. binderless particleboard has uniform density compared to natural Rhizophora spp. wood. In general, the differences in the variability of the profile density decrease as the particle size of the pellet samples decreases.
► Mass attenuation coefficients were determined by X-ray fluorescent photons. ► Sample with smaller particle size found very close to calculated water XCOM. ► X-ray computed tomography scanner was used to investigate the density distribution. ► The density distribution profile is improved with the decrease in the particle size. ► Rhizophora spp. binderless particleboard could be used as phantom material.