Abstract
The quality and properties of laser clad layers are dependent on the microstructure and properties of the interfaces with the substrate. The present paper reports, in details, on the characterisation of microstructure of the coating and interfacial layers evolved as a result of the CO
2
laser remelting of previously plasma sprayed Al-12Si alloy onto C short fibres reinforced AS41-Mg composite. Scanning electron microscopy (SEM), wavelength dispersive X-ray (WDX) analysis and X-ray diffraction (XRD) were employed to identify the phases arising in the interfacial layers. The latter are composed mainly of Mg
17
Al
12
and Mg
2
Si phases. XRD was conducted on the clad layers at different distances from the interface. At the same layers, the potentiodynamic polarisation in sodium chloride solution was measured and it was found that as the Mg content increases in the clad coating, the corrosion resistance decreases. However, the corrosion current of the clad coating is around two orders of magnitude lower than that of the C/Mg composite.