Abstract
Cleaning of food fouling deposits in processing equipment is costly and time consuming. Fouling deposits form as a result of adhesion of species to the surface and cohesion between elements of the material. Cleaning can result from either or both adhesive and cohesive failure. In this study, the aim was to investigate the removal kinetics of an adhesive material and to design a novel cleaning in place (CIP) protocol for these kinds of materials at industrial scale to reduce environmental impact of cleaning processes. It was detected that different variables controlled the cleaning process in removal of adhesive deposit. Temperature was not found as a significant variable in the initial stage of cleaning. Velocity of cleaning water controlled the cleaning at this stage when top layers of the deposit were removed by fluid mechanical removal due to breakdown of weak cohesive interaction. In the later cleaning stage, both velocity and temperature significantly contributed to cleaning, which suggested that both hydrodynamic forces and rheological changes are needed to overcome adhesion forces between the deposit and surface. Hence, a novel “two step CIP protocol” was proposed due to existence of different mechanisms in cleaning. When compared with conventional one step CIP protocols currently used in the processing plants, the proposed CIP protocol reduced the energy consumption by 40% without decreasing the cleaning efficiency.
Schematic representation of the pilot plant for optimization of cleaning-in-place protocol (CIP). [Display omitted]
•Cleaning in place protocol was optimised in terms of cleaning inputs.•A two step cleaning in place protocol was proposed for industrial cleaning processes.•The first was application of water at ambient temperature in the 1st step.•The second was application of hot water in the 2nd step at the same velocity.•The proposed protocol remarkably decreased energy consumption and waste water amount.