Abstract
Spray drying of Chitosan solutions to prepare microparticles either using pilot or industrial scale spray dryer is a complex process; tracking morphological changes and obtaining drying kinetics of a single droplet would be very difficult. The acoustic levitator being a non-intrusive method is a useful experimental apparatus that enables particle/droplet suspension in the gaseous medium and capable of mimicking the drying process in a spray dryer. The drying of chitosan aqueous solutions into solid particles was investigated. The prediction of the size and drying kinetics until the formation of the solid structure was performed in an acoustic levitator. Studying the drying of single droplets is crucial for revealing the influence of the drying process parameters on the formation of dried particles. Droplets with initial chitosan concentration (10, 20, and 30 mg/ml) were investigated at different air-drying temperatures. A Reaction Engineering Approach (REA) model was developed and compared with the experimental drying curves, a very well agreement was found between the drying experiments and the REA model with a relative error of about 3% between the initial droplet mass and predicted droplet mass by the REA model.