Abstract
Fibrous filter made up of non-woven material was utilized in many industrial applications for increasing the collection efficiency and the quality factor. But there exists a competing effect among the fibre diameter, filtration efficiency, pressure drop, and sometime type of aerosol (liquid or solid) plays a crucial role in the performance of the fibrous filter. To avoid overdesigning of the filter along with better performance, optimum set of parameters are to be decided before the manufacturing process. In the current effort, the desirability approach and along with the “Response Surface Methodology (RSM)” were considered to optimize filtration efficiency and pressure drop simultaneously. In this perspective, the impact of Filtration velocity (v), Basis weight (φ), Particle diameter (dp), and Packing fraction (α) on filtration efficiency (η) and pressure drop (Pd) was studied. Based on the outcome, the predicted values lie within experimental data through smart agreement. The maximum percentage (%) error was only 3% and 6% filtration efficiency (η) and pressure drop (Pd), which determine the effectiveness of this useful model. The most dominant factor which affects the filtration efficiency (η) was found to be the Basis weight (φ), followed by packing fraction. However, in the case of pressure drop, the most dominant factors were filtration speed followed by the pachining fraction. Moreover, artificial neural network (ANN) models are developed for the prediction of filtration efficiency and pressure drop. The model accuracy has been estimated by calculating “Mean Square Error (MSE), Mean Absolute Error (MAE), and coefficient of determination (R2)”. Both models show promising results when compared with experimental data with the R2 value of 98.50–99.86. The optimized values of the maximum filtration efficiency and minimum pressure drop simultaneously were obtained for v = 5, φ = 59.60, dp = 52.23, α = 0.24 according to desirability approach.
Droplets migration in coalescing filters. [Display omitted]
•RSM was utilized to optimize filtration efficiency and pressure drop simultaneously.•Impact of Filtration velocity (v), Basis weight (φ), Particle diameter (dp), and Packing fraction (α) on filtration efficiency (η) and pressure drop (Pd) was studied.•ANN models are developed for the prediction of filtration efficiency and pressure drop.•The model accuracy has been estimated by calculating “Mean Square Error (MSE), Mean Absolute Error (MAE), and coefficient of determination (Rs).