Abstract
A new chelating fiber (PET-TSC) was prepared with PET for fast removal of Hg2+, Cu2+ and Co2+ from water. Elemental analysis, SEM, BET surface area, C-13 NMR, FTIR and X-ray diffraction spectra were used to characterize PET-TSC. The higher uptake capacity of the studied metal ions was observed at higher pH values. Kinetic study indicated that the adsorption of Hg2+, Cu2+ and Co2+ followed the pseudo-secondorder equation, suggesting chemical sorption as the rate-limiting step of the adsorption process. The best interpretation for the equilibrium data was given by Langmuir isotherm, and the maximum adsorption capacities were 120.02, 96.81 and 78.08 mg/g for Hg2+, Cu2+ and Co2+ ions, respectively. 1 M HCl or 0.1 M EDTA could be used as effective eluant to desorb the Hg2+, Cu2+ and Co2+ adsorbed by PET-TSC, and the adsorption capacity of PET-TSC for the three heavy metal ions could still be maintained at about 90% level at the 5th cycle. Accordingly, it is expected that PET-TSC could be used as a promising adsorbent for fast removal of heavy metal ions from water, and the present work also might provide a simple and effective method to reuse the waste PET fibers. (C) 2013 Elsevier B.V. All rights reserved.