Abstract
In sandstone, there is a trend between porosity (Phi ) and permeability (k). It is a linear relationship having the form log (k) = a + (b Phi ). The slope, intercept, and degree of scatter of the log(k) - Phi trends vary from formation to another. These variations are attributed to differences in initial grain size and sorting, diagenetic history, cementation, clay content, pore geometry, and compaction history. In the literature, permeability and porosity modeling by using lab experiments was carried out by using unconsolidated sandstone, sand packs, or synthetic particles. Such models cannot be applied to predict flow properties of consolidated natural sandstone. Furthermore in these models, sand grain size, shape, and sorting factors were considered as the main factors that affect porosity and permeability. Hardly, any attention was paid to the confining pressure and the fraction of cementing material that bind the grain to form a coherent rock. If these two crucial aspects are not taken into consideration during the model development, the model cannot be applied to natural consolidated sandstone. The main objective of the present paper is to develop a new model for porosity versus permeability taking into account important factors such as sand grain size and sorting, compaction pressure, and concentration of cementing material that bind the sand grains. The effect for clay swelling or migration was however discarded, as the sand grains were washed prior to consolidation. The sand used in producing the sandstone cores was medium- to fine-sized well-sorted sand grains. The grain's sphericity was measured to be in the range of (0.8-0.9) with little angularity. The fabricated cores have an average compressive strength of 5,700 psi, which is comparable with Bera sandstone strength. Also, the produced cores were stable in the fluid media as they were subjected to 300 degrees C to allow cementing material to be crystallized. The aspect of the present work was to analyze the dependence of both the permeability as well as the porosity on the variables of the present study that consist of grain size, cementation fraction, and the confining pressure. Using the experimental data, a linear relationship, in terms of each variable, was developed here that can eventually help researchers to fabricate cores with desired properties. The second step was to generate more general models to be used as references for scholars for further work in this research field. Nonlinear regression analysis was carried out on all the three variables of the present study to obtain two nonlinear correlations: one describes the behavior of permeability and the other describes porosity. In the third step, an advanced correlation that describes permeability versus porosity in a quantitative manner was developed by using nonlinear regression analysis. Permeability was studied accordingly as a function of all the three variables of the present study as well as porosity. This step represents the main objective of this paper. Copyright 2013 Saudi Society for Geosciences