Abstract
Pre-treatment of seawater plays a critical role in removing colloidal particles, algae, sediment, and microbes, which could adversely affect the desalination process. This study focused on the utilization of the natural process of infiltration by beach wells to pre-treat the intake water for the desalination process. The scope of the study was achieved by drilling two beach wells at Al-Khobar and Jubail sites at the Arabian Gulf of Saudi Arabia at 50 m depth each. In addition to that, a total of eight monitoring wells were drilled for pump testing. Numerical modeling was conducted using SEEP/W to investigate the properties of well water flux at the beach wells. The comprehensive physio-chemical parameters such as cation, silt density index (SDI), total dissolved solids (TDS), total suspended solids (TSS), chemical oxygen demand (COD), total organic carbon (TOC), salinity, and alkalinity were analyzed for a quality assessment concerning the actual seawater. Preliminary experimental results show a reduction of the targeted parameters and indicate that beach well sand filtration in the Eastern Province would be a valuable pre-filtration step in reverse osmosis (RO)-based drinking water production systems. The water flux values for both sites were 0.0197 and 0.0208 m(3)/s/m(2), respectively, which corresponds to 72 m(3)/h/m(2)and 1356.48 m(3)/h/m(2). In terms of the rate of pumping flow, the model suggests production can be increased by 20 and 53 times the measured production of the Jubail and Al-Khobar sites, respectively. The experimental results of water parameters, such as cation, SDI, TDS, TSS, etc., indicate that beach well sand filtration in the Eastern Province would be a valuable pre-filtration step in reverse osmosis drinking water production systems.