Abstract
•Calibrating the CDP model for the FRP confined rectangular RC columns.•Proposing a simplified FEA based CDP model for the FRP confined RC columns.•Assessing the impacts of design variables on responses of FRP confined RC columns.•Reliability of design codes are assessed with proposing minor improvements.
Finite element (FE) simulation of confined RC columns is a complex task, as it involves the precise representation of a concrete material model that could express the volumetric change of concrete under a triaxial state of stress. The problem of confining RC columns using fiber-reinforced polymer (FRP) is more complex. This is due to the passive nature of FRP containment. Recently, the concrete damage plasticity (CDP) model available in an FE software product (ABAQUS) has been widely used to represent RC columns subjected to axial loading. The present paper aims to calibrate the concrete dilatancy angle and viscoplastic regularization parameters in the CDP model for the applications of square RC columns confined with FRP sheets. Ten experimental FRP-confined RC column specimens are incorporated in the calibration. In addition, a parametric study is investigated, including 96 cases, to obtain the influence of various design variables on the ratio between the confined to unconfined concrete compressive strength (fcc/fc). Four design variables are considered (i.e., the corner radius, concrete compressive strength, FRP reinforcement ratio, and cross-sectional size of columns). The study also focuses on assessing the reliability of four design codes: ACI-440, ECP-208, CSA-S806 and FIB-Bulletin-14. The numerical results show that a viscoplastic regularization with a fixed value equal to 0.0005 could provide accurate behavior. Nevertheless, the dilation angle cannot be considered a fixed value and should be related to the confinement degree coefficient Cd, which depends on the cross-sectional geometrical and FRP properties. Among the four considered design codes, ACI-440 and ECP-208 provide more accurate behavior than CSA-S806 and FIB-Bulletin-14.