Abstract
Certain occupations like welding, painting, and vehicle repairing are associated with regular exposure to dust, exhausts, fuels, fumes, PM, and vapors of welding, solvents, and paint. Many studies have proved a reduction in lung functions due to exposure to these agents. The present study aims to assess and compare respiratory symptoms and pulmonary functions among exposed and non-exposed persons as well as suggests controls respectively. A cross-sectional case study was carried out among small scale industry workers having matched demographic and anthropometric parameters. Medical Research Council (MRC) questionnaire and Micro Direct computerized automated spirometer were used for recording respiratory ailments and pulmonary function tests (PFT) respectively. The percentages of mechanics, welders and painters were 40.9, 31.8, and 27.3 respectively. The highest reported respiratory symptom was chest tightness and whistling among exposed (22.7%) and unexposed (10%). Among study exposed cases, the occupational exposure was found as often (22.7%), sometimes (68.2%) and never (9.1%) while the reported use of airway protection (masks) was very low. Overall respiratory health of the exposed versus controls was reported as excellent (54.5% vs 73.4%), good (27.3% vs 23.3%) and average (18.2% vs 3.3%) respectively. The exposed group on contrary to control one has decreased mean values for FEV1 (3.12 vs 3.50), FVC (4.12 vs 4.43), FEV1/ FVC % (79.60 vs 80.79) and PEF (414.77 vs 523.16). The present study reveals that exposed workers are at increased risk of developing respiratory symptoms and decreased pulmonary functions as compared to unexposed. Such exposure research studies are instrumental in health status evaluation of workers. However, this area has been neglected by the researchers in Saudi Arabia. It is, thus, strongly recommended to carry out prospective studies to substantiate the study results including large sample size, background pollutants concentrations and biological monitoring. Control strategies should be adopted to reduce the vapor concentration in the ambient air, protect and promote respiratory health of workers.