Abstract
Aluminum alloys and composites are used in automobile and aerospace industries due to good mechanical properties, higher corrosion resistance and light weight. The compression test of materials at elevated temperature is useful to study the flow stress, workability, and the analysis of the processing conditions. In this paper, ring specimens produced from Al6061/15%SiCp composite were subjected to uniaxial hot compression tests to invistigate the deformation behavior of the material. The tests were performed at high temperatures ranged from 300 degrees C to 500 degrees C and strain rates of 0.008 s(-1) to 2.7 s(-1). The flow stress-strain curve at different strain rates and temperatures was determined. The regression analysis was performed to predict the flow stress during the compression test. The comparison between the experimental and theoretical results was also conducted. In addition, finite element method was applied to simulate and validate the compression behavior of the composite ring. Furthermore, the erosioncorrosion tests by slurry pot method were conducted to examine the influence of SiC particles on erosion corrosion resistance of the material. The results showed that the flow stress of the Al6061/15/vol.%SiCp composite is correlated directly with temperature and strain rate. Also, the erosion corrosion resistance increased with adding SiC particles to Al6061 alloy.