Abstract
An experimental and numerical analysis of the effects of methanol and ethanol addition on polycyclic aromatic hydrocarbon (PAH) and soot formation in non-premixed ethylene flames is reported here. Laser induced incandescence (LII) and laser-induced fluorescence (LIF) techniques were used to measure soot volume fractions and relative PAH concentrations in counterflow diffusion flames, respectively. A comprehensive chemical kinetic analysis was performed by modeling soot with detailed gas-phase chemistry and a sectional method. The results showed that although both methanol and ethanol are typically regarded as clean fuels, their presence in ethylene diffusion flames had the opposite effects on PAH and soot formation. The LIF and LII signals decreased significantly as methanol fraction increased, suggesting a soot-inhibiting role for methanol. Apart from the fact that methanol addition reduced the carbon supply for soot thus having a fuel-dilution effect (methanol converted primarily to CO), the increased H-2 concentration from methanol decomposition was seen to chemically suppress incipient benzene ring formation and subsequent PAH and soot growth processes. In contrast, a small amount of ethanol addition enhanced soot formation, which was well captured by the numerical model. Reaction pathway analysis showed that ethanol decomposition produced a relatively large amount of methyl radicals, enhancing the chemical interaction between CH3 and C-2 species and, thereby promoting the formation of propargyl and C-4 species. As a result, benzene formation was promoted through reactions between C2H2 and C-4 species and via C3H3 recombination reaction, leading sequentially to the enhancement of PAH growth and soot formation. (C) 2019 The Combustion Institute. Published by Elsevier Inc. All rights reserved.