Abstract
The saturation ageing tensile stiffness (SATS) procedure is the first laboratory asphalt mixture durability protocol to combine moisture damage and oxidative ageing during the conditioning of asphalt mixtures prior to mechanical testing. However, the application of the SATS procedure has tended to be predominantly targeted at base materials with relatively 'hard' binders and overall high stiffness modulus requirements and is considered potentially too severe for more standard asphalt mixtures. This research study focused on understanding the effect of changes to the SATS conditioning parameters on the relative moisture damage assessment performance of asphalt mixtures, particularly 'softer' binder, high binder content and, finally, low air void content mixtures. Using four different aggregate types, together with 'hard' 10/20 pen and 'softer' 40/60 pen bitumen, the parameters of pressure, temperature and duration were altered, either one at a time or in combination, to arrive at a suitable combination for testing more commonly used 40/60 pen material. The optimum combination of parameters to allow the SATS procedure to be used for a wide range of typically used asphalt mixtures was found to be 0.5 MPa pressure, 85°C temperature and 24 h duration. The revised SATS durability conditioning protocol was still able to successfully discriminate between 'poor' moisture susceptible aggregate and 'good' material.