Abstract
Nowadays, the most recent optical configuration based on Cassegrain and Fresnel lens designs of concentrator photovoltaic(CPV) has shown a race to achieve the ultrahigh concentration ratio. Still, none of those has experimentally shown an optical concentration ratio (GC) beyond 2000 suns. This is because their energy concentration ratios are challenged by the excessive temperature raised throughout the optical stages, which diminishes the efficiency of the solar cell. In this context, this research work aims to numerically investigate a microscale pin-fins heat sink configuration to enhance the thermal performance and the cost-competitivity of ultrahigh CPV thermal receiver. The impacts of the solar cell area, cell efficiency, and heat sink's material have been analyzed and discussed. The results showed that a circular pin-fins heat sink could accomplish a drop of 23.28% in the maximum operating cell temperature at 10 000 suns for cell area of 1 x 1 mm(2)relatively compared to the conventional flat-plate heat sink. Furthermore, for a circular pin-fins heat sink with a cell area of 2 x 2 mm(2), the cell temperature started exceeding the safe operating range of temperature (80 degrees C) at 8000 suns with an average temperature of 96.1 degrees C and reaching a maximum of 113.91 degrees C at 10 000 suns. A gradient temperature on the planar direction of the aluminum circular pin-fins heat sink was about 1.187 degrees C at 10 000 suns whereas 0.703 degrees C was recorded in the case of a copper circular pin-fins heat sink. The circular pin-fins heat sink showed the highest thermal performance resulting in maintaining the solar cell temperature within its safe operating range even beyond 10 000 suns. From an economic point of view, aluminum circular pin-fins heat sink has been found to be less costly than the copper one. Finally, it was found that at 8000 suns, the flat-plate heat sink cost is more expensive than the traditional pin-fins heat sink by 14.7%, where the flat-plate heat sink becomes the worst economic configuration at 10 000 suns. At that concentration ratio, the cost has increased by 43.38%, 5.75%, and 10.61% compared to the traditional pin-fins heat sink, cylindrical pin-fins heat sink, and circular pin-fins heat sink, respectively.