Abstract
The construction and performance characteristics of a new potentiometric PVC membrane sensor for the determination of sodium dodecyl sulfate (SIDS) are described. The sensor was based on the use of an N-cetyl-N,N,N trimethyl ammonium (CTA) dodecyl sulfate (DS) ion pair as ion exchange sites in PVC matrix in the presence of o-nitrophenyl octylether as plasticiser. The sensor exhibited a fast, stable, and near-Nernstian response for SIDS over the concentration range of 1 X 10(-3) to 10(-6) M at 25 degrees C and the pH range 4-8.5 with anionic slope of 52.5 +/- 0.5 mV decade(-1). The lower detection limit was 3 x 10-6 M, and the response time was 25s. Selectivity coefficients of SIDS with respect to a number of different species were investigated. There were negligible interferences caused by most of the investigated anions. The determination of 1.0-280.0 mu g mL(-1) of SDS in aqueous solutions showed an average recovery of 99.1%, and the mean relative standard deviation was 1.4 at 100 mu g mL(-1). The results obtained in the determination of SIDS in liquid soap, water and in some pharmaceutical preparations compared favourably with those obtained by the Methylene Blue active substance method (MBAS). In the present investigation, the DS sensor has been used as an end-point indicator electrode for some precipitation titration reactions, e.g. titration of SIDS with CTMABr and cetylpyridinium chloride with SDS.