Abstract
Novel paper-based potentiometric platforms for rapid, cost-effective, and simple determination of the salicylhydroxamic acid (SHAM) drug are presented. Both the SHAM sensor and the reference Ag/AgCl electrode were integrated together on the miniaturized paper platforms. The ion-sensing membrane for the presented sensor is based on the use of SnIV-tetraphenylporphyrin (SnIVTPP) as a charged carrier within a plasticized poly(vinyl chloride) (PVC) matrix. Multiwalled carbon nanotubes (MWCNTs) were used as an ion-to-electron transducer. The resulting sensor revealed a rapid and stable response with a Nernstian slope of −59.3 ± 0.7 mV/decade over the linear range of 1.0 × 10–6 to 1.0 × 10–3 M and a detection limit of 0.7 μM. All measurements were carried out in 30 mM phosphate-buffered solution (PBS) at pH 7.2. Intra- and interday precision were measured and found to be 1.7%. The relative standard deviation (RSD%) ( = 5) was calculated as 2.43% after utilizing five different electrodes (n = 5). The selectivity behavior of the prepared electrodes in the absence and presence of ionic additives was evaluated. The selectivity pattern showed a non-Hofmeister selectivity pattern in the existence of anionic additives with enhanced potentiometric selectivity for SHAM over different lipophilic anions (e.g., ClO4 –, SCN–, and I–). The presented device was successfully applied for SHAM determination in pharmaceutical preparations. This paper-based analytical device can be potentially manufactured at large scales and provides a portable, rapid, disposable, and cost-effective analytical tool for measuring the SHAM drug.