Abstract
The development of anhydrous proton conducting membrane is important for the operation of polymer electrolyte membrane fuel cell (PEMFC) at intermediate temperature (100-200 degrees C). In the present work, poly(1-vinyl-1,2,4-triazole), PVTri was produced by free radical polymerization of 1-vinyl-1,2,4-triazole with a high yield. The molecular weight of the homopolymer was measured via gel permeation chromatography (GPC) and M-w was found to be 104,216 g/mol. The structure of the homopolymer was proved by solid state C-13 CP-MAS NMR spectroscopy. The polymer was doped with phosphoric acid at various molar ratios x = 1 and x = 2. The proton transfer from H3PO4 to the triazole rings was proved with Fourier-transform infrared spectroscopy (FT-IR). Thermogravimetry (TG) analysis showed that the samples are thermally stable up to approximately 250 degrees C. Differential scanning calorimetry (DSC) results illustrated the homogeneity of the materials as well as the plasticizing effect of the dopant. The electrochemical stability of the materials was studied by cyclic voltammetry (CV). The proton conductivity of these materials increased with dopant concentration and the temperature. In the anhydrous state, the proton conductivity of PVTri I H3PO4 is 5 x 10(-3) S/cm at 150 degrees C and the conductivity of PVTri 2 H3PO4 was 4 x 10(-3) S/cm at 140 degrees C. (C) 2008 Elsevier B.V. All rights reserved.