Abstract
This paper reports the effect of Nickel (Ni) on indium sulfide (In2S3) powder. This work presents a systematic study of the physical and dielectric properties of In2-xS3Nix powders with 0, 2, 4, and 6 at.% of nickel. Doped and undoped samples were investigated by X-ray powder diffraction (XRD), energy dispersive X-ray spectroscopy, thermal gravimetric analysis, Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, scanning electron microscopy (SEM), and impedance spectroscopy. XRD patterns revealed that each In2-xS3Nix composition was crystalline, which was also confirmed by the FTIR results. The presence of Ni in the samples was confirmed by energy dispersive spectroscopy (EDS). The Raman studies show different peaks related to the In2S3 phase and do not reveal any secondary phases of In-Ni and Ni-S. The SEM images of the undoped and Ni-doped In2S3 samples indicated a correlation between dopant content and the surface roughness and porosity of the samples. The impedance analysis indicated semiconductor behavior present in all samples, as well as a decrease in resistance with increasing Ni content. This work opens up the possibility of tailoring the properties and integrating Ni-doped In2S3 nanocomposites as thin film layers in future solar cells.