Abstract
Featured Application The present study reports the synthesis of magnetic Fe3O4/CS/PEI nanocomposite for the application as an adsorbent for the removal of arsenic ions from the aqueous solution. The removal of heavy metals from water has become a global environmental problem. Various materials have been applied as adsorbent to remove metals from water. In this field, nanomaterials have been gaining increasing interest due to their exceptional properties. In this work, we discuss the synthesis of a core-shell structure nanocomposite by the modification of magnetic chitosan (CS) (Fe3O4/CS) with polyethylenimine (PEI) to produce Fe3O4/CS/PEI composite for the adsorption of arsenic ions (As(V) and As(III)) from aqueous solution. The synthesized materials were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscope (TEM), and vibrating sample magnetometer (VSM). The results indicated the successful combination of three components of the nanocomposite. The adsorption conditions were optimized by studying the effect of different parameters included pH, contact time, initial concentration, and adsorbent dosage. The optimum adsorption pH was found to be 6.7 while the optimum adsorbent dosage was found to be 2.0 and 1.5 g/L for As(III) and As(V), respectively. The removal efficiency for the uptake of As(III) and As(V) ions over Fe3O4/CS/PEI nanocomposite at optimum conditions was found to be 99.5 and 99.7%, respectively. The experimental results were fitted using Freundlich's and Langmuir's isotherms. The data were more fitted to Langmuir isotherm providing a suggestion of monolayer adsorption with maximum adsorption capacity equal to 77.61 and 86.50 mg/g for the removal of As(III) and As(V), respectively. Moreover, linear regression coefficient (R-2) indicated that the adsorption of arsenic ions over the synthesized magnetic nanocomposite obeyed pseudo 2nd order suggesting the chemisorption process. The reusability of the nanosorbent for arsenic uptake using sodium hydroxide as eluent was also assessed up to five cycles. Interestingly, Fe3O4/CS/PEI nanocomposite can be considered as a promising adsorbent for As ions' removal from water and should be tested for the removal of other pollutants.