Abstract
In this study, poly(lactic acid) (PLA)/poly(butylene succinate) (PBS) dual-layer membranes filled with 0–3 wt% cellulose nanowhisker (CNWs) were fabricated with aim to remove metal ions from wastewater. An integrated method was employed in the membrane fabrication process by combining water vapor-induced and crystallization-induced phase inversions. The membrane thickness was measured in between 11 and 13 μm, which did not pose significant flux deviation during filtration process. The 3% CNW filled membrane showed prominent and well-laminated two layers structure. Meanwhile, the increase in CNWs from 0 to 3% loadings could improve the membrane porosity (43–74%) but reducing pore size (2.45–0.54 μm). The heat resistance of neat membrane enhanced by 1% CNW but decreased with loadings of 2–3% CNWs due to flaming behavior of sulphated nanocellulose. Membrane with 3% CNW displayed the tensile strength (23.5 MPa), elongation at break (7.1%), and Young's modulus (0.75 GPa) as compared to other samples. For wastewater filtration performance, the continuous operation test showed that 3% CNW filled membrane exhibited the highest removal efficiency for both cobalt and nickel metal ions reaching to 83% and 84%, respectively. We concluded that CNWs filled dual-layer membranes have potential for future development in the removal of heavy metal ions from wastewater streams.
•PLA/PBS dual layer membrane incorporated with nanocellulose for metal ions removal•Membrane fabrication process using water vapor-induced phase inversion technique•Nanocellulose acts as pore forming and crystallizing agent in membrane structure.•Great thermal, mechanical, and wettability properties for filtration process.•High filtration performance for water penetration and metal ions adsorption.